Even though wildfires are a part of the natural process of creation and destruction in the environment, the bad thing for people is that sometimes their homes are located directly in the path. A large number of people have to worry every year whether a wildfire will affect their area, but if you own your home and you know what to do, there are things that can protect your home from them. Depending on the circumstances and where your home is located, it may not be enough, but it certainly cannot hurt to try and you may actually end up saving your home.
Using fire-resistant materials on the exterior of your house is essential. The roofing material is the most important, since this has the largest amount of surface area and sparks of fire called firebrands will be picked up by the wind and possibly carried over your house. Having the fire-resistant roofing material such as metal, fiberglass, or tile will slow down the spread of the fire from the roof and it may not even catch on fire at all from one of these small sparks. You do not want to use oil-based roofing materials on a home that is located in a place at risk of wildfires.
Fire-resistant materials on the outer walls of your home will also slow down the spread of the fire, such as stone, metal, or brick, so if you are considering having a home built for you, these are materials you really want to consider. You should also have smaller windows on the exterior of your home, since large windows are more likely to break and allow the hot air and fire sparks from the outside of the house inside, where it will catch curtains and everything else. If you have to have large windows, have multi-pane ones instead of single-pane.
If there is a wildfire close to where you live, wet down the exterior of the house, especially your roof. This will give a little extra protection against firebrands floating by on the wind. Wetting down the yard and vegetation will also help, but you should do this just before you decide to leave the house.
Get rid of any dead vegetation in the yard and do not allow things like dead leaves to build up, since these are easy targets. If you do have a pile of leaves in your yard, the best thing that you can do before you evacuate is soak them down with water.
Jim Corkern is a writer and promoter of quality
Chicago Water and Sewage Extraction and other states and cities such as
North Carolina Water and Sewage Extraction companies across the united states.
Thursday, October 18, 2007
Treating Moldy Clothing
Clothing contaminated by mold is not a fun thing to have to deal with, especially if it happens to affect an old favorite item of clothing that we found lying in the back of a closet or behind a dresser. We are usually hesitant to throw it away, but sometimes we are unsure if the item can be completely cleansed or not.
The Bible talks about mold contaminated clothing in ancient times and these items were always seen as untreatable and were always thrown away. It is fortunate that these days we know that these items can usually be completely cleaned, but we may not be able to completely get rid of the stain the mold left behind. This is particularly true for leather items, since this is a piece of dead skin and the natural role of mold is to decompose dead organic matter.
The cause of moldy clothing usually has something to do with moisture and forgetfulness. Sometimes we get our clothes wet and just toss them into the laundry basket or into the bathroom closet and forget about them. Doing this is a mistake, because if they are not dried within about 48 hours, mold will start to grow on them. What is even worse is that dry clothing is usually thrown on top of it and the infestation spreads to other clothes. Mold can also start growing on items that have been left behind dressers or in closets that become humid and do not get enough ventilation.
Molded clothing can usually be cleaned by using borax laundry detergent in the washing machine and allowing the clothes to soak for a few hours. Wash in warm to hot water, depending on what the clothing’s dye will tolerate without the colors bleeding everywhere.
After the clothes are done the first time, using a stain remover on them before washing them the second time could help remove any stains that may exist on the clothes. Washing the clothes at least twice is generally recommended, since most of the time it takes more than once to get rid of the infestation completely. Do not use your dryer to dry moldy clothes, however, since an artificial heat source like this usually sets the stain further into the fabric. Put the clothes outside to dry instead.
Depending on the amount of clothing that you have to wash and re-wash, it might be easier to just throw the afflicted clothing away than try to restore it, especially if there are a lot of stains. Most clothing is salvageable, though, as long as you treat it properly.
Jim Corkern is a writer and promoter of quality
New York Sewage Damage Clean-up and other states and cities such as
North Carolina Water and Sewage Extraction companies across the united states.
The Bible talks about mold contaminated clothing in ancient times and these items were always seen as untreatable and were always thrown away. It is fortunate that these days we know that these items can usually be completely cleaned, but we may not be able to completely get rid of the stain the mold left behind. This is particularly true for leather items, since this is a piece of dead skin and the natural role of mold is to decompose dead organic matter.
The cause of moldy clothing usually has something to do with moisture and forgetfulness. Sometimes we get our clothes wet and just toss them into the laundry basket or into the bathroom closet and forget about them. Doing this is a mistake, because if they are not dried within about 48 hours, mold will start to grow on them. What is even worse is that dry clothing is usually thrown on top of it and the infestation spreads to other clothes. Mold can also start growing on items that have been left behind dressers or in closets that become humid and do not get enough ventilation.
Molded clothing can usually be cleaned by using borax laundry detergent in the washing machine and allowing the clothes to soak for a few hours. Wash in warm to hot water, depending on what the clothing’s dye will tolerate without the colors bleeding everywhere.
After the clothes are done the first time, using a stain remover on them before washing them the second time could help remove any stains that may exist on the clothes. Washing the clothes at least twice is generally recommended, since most of the time it takes more than once to get rid of the infestation completely. Do not use your dryer to dry moldy clothes, however, since an artificial heat source like this usually sets the stain further into the fabric. Put the clothes outside to dry instead.
Depending on the amount of clothing that you have to wash and re-wash, it might be easier to just throw the afflicted clothing away than try to restore it, especially if there are a lot of stains. Most clothing is salvageable, though, as long as you treat it properly.
Jim Corkern is a writer and promoter of quality
New York Sewage Damage Clean-up and other states and cities such as
North Carolina Water and Sewage Extraction companies across the united states.
Types of Sump Pumps
The purpose of a sump pump is to pump water out of your basement before it completely floods.
If you are thinking about installing a sump pump into your basement, this is a very good idea. The problem mainly lies with what kind of sump pump you need to purchase. There are about three different kinds of sump pumps and depending on your own circumstances, you may need one more than the other.
A pedestal sump pump is an electricity powered pump that stands up in your basement and has a motor that is a few feet over it. This motor should not be gotten wet at any point. It has a float that will activate a switch inside the pump to turn it on when water reaches a high level in the basement. This kind of sump pump is best for basements that need to be drained frequently. This is the least expensive kind of pump, but they tend to be a lot noisier than the submersible kind.
Submersible sump pumps are installed into the ground and as the name might imply, they are designed to work while they are under water. They also have a float activated switch that will turn the pump on as it is needed. These tend to be more expensive than the pedestal pump type, but these are quieter and usually last longer. They have a sealed and oil-cooled motor that protects them from dust and water.
Something else to consider is whether or not you need to acquire a plastic or a cast iron sump pump. Cast iron pumps last a lot longer than their plastic counterparts, but the plastic ones do not last as long. No matter which kind you might get, any sump pump that you get should feature a check valve on the pipe that lets the water out so water does not go back into the pump after it has shut off. If water flows in and out of the pump excessively, this will cause the pump to turn on and off more than it needs to and this will drastically shorten its life.
Water powered sump pumps run using the water pressure in your home plumbing system and they also have a float-activated switch. These require no electricity in order to function and can be used as a backup sump pump system during power failures.
Jim Corkern is a writer and promoter of quality
New York water damage restoration and other states and cities such as
Connecticut mold remediation companies across the united states.
If you are thinking about installing a sump pump into your basement, this is a very good idea. The problem mainly lies with what kind of sump pump you need to purchase. There are about three different kinds of sump pumps and depending on your own circumstances, you may need one more than the other.
A pedestal sump pump is an electricity powered pump that stands up in your basement and has a motor that is a few feet over it. This motor should not be gotten wet at any point. It has a float that will activate a switch inside the pump to turn it on when water reaches a high level in the basement. This kind of sump pump is best for basements that need to be drained frequently. This is the least expensive kind of pump, but they tend to be a lot noisier than the submersible kind.
Submersible sump pumps are installed into the ground and as the name might imply, they are designed to work while they are under water. They also have a float activated switch that will turn the pump on as it is needed. These tend to be more expensive than the pedestal pump type, but these are quieter and usually last longer. They have a sealed and oil-cooled motor that protects them from dust and water.
Something else to consider is whether or not you need to acquire a plastic or a cast iron sump pump. Cast iron pumps last a lot longer than their plastic counterparts, but the plastic ones do not last as long. No matter which kind you might get, any sump pump that you get should feature a check valve on the pipe that lets the water out so water does not go back into the pump after it has shut off. If water flows in and out of the pump excessively, this will cause the pump to turn on and off more than it needs to and this will drastically shorten its life.
Water powered sump pumps run using the water pressure in your home plumbing system and they also have a float-activated switch. These require no electricity in order to function and can be used as a backup sump pump system during power failures.
Jim Corkern is a writer and promoter of quality
New York water damage restoration and other states and cities such as
Connecticut mold remediation companies across the united states.
Water, Concrete, and Your Basement
You may not realize it, but concrete is a naturally porous building material and any water that is seeping through it and into your basement is not an uncommon problem. Unfortunately, since all concrete is porous and water will eventually seep through it, anyway, the problem usually lies not with the concrete itself, but with the construction of it.
Since basements are by nature underground and are areas that are generally pretty closed off from the outside environment, humidity is typically a problem unless you know how to deal with it. It can lead to flooding and excessive dampness, which in turn will eventually lead to mold growth. If your basement in your home is chronically wet, you should do what you have to in order to dry this area out and waterproof it as soon as possible to avoid structural rot.
The first thing that you need to do is check outside your home around the foundation and make sure that the basement is not taking on water from the outside due to clogged rain gutters on top of the house or downspouts that are not properly being drained. Just dumping some more dirt around the base of your home may solve the problem if the leaks and flooding only occurs during times of heavy precipitation. All of the soil around your home should be slanted away from the base so that water drains as quickly away as possible.
Most homeowners simply try to cracks in the wall this by caulking the crack shut, but this will not work. Water still seeps through it and in a couple of years, the caulk will peel away. Hydraulic cement also does not work very well, because it does not bond well to the concrete. Cement will be very rigid while the concrete is always moving, shrinking, and expanding over time. The cement that you place inside the crack will become just as loose as caulking would.
The best thing to do is to about cracks in the basement wall is to use a low-pressure crack injection of concrete. It used to require heavy and expensive equipment to do this, but these days you can accomplish this task with a simple conventional caulking gun.
Since most cracks in basement walls are caused by water seepage and are not structurally dangerous, expandable polyurethane is typically the best choice to repair them with. It does not add any structural strength to the concrete, but simply creates a waterproof barrier. No matter whether the crack is dry or wet at the time you are going to fill it, the polyurethane will still bond to it.
Epoxy injection can also be used, but it will not bond to wet surfaces, among other problems. It should be used only when there are cracks that appear in concrete block walls or big cracks in slabs of concrete.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and
mold remediation companies across the united states.
Since basements are by nature underground and are areas that are generally pretty closed off from the outside environment, humidity is typically a problem unless you know how to deal with it. It can lead to flooding and excessive dampness, which in turn will eventually lead to mold growth. If your basement in your home is chronically wet, you should do what you have to in order to dry this area out and waterproof it as soon as possible to avoid structural rot.
The first thing that you need to do is check outside your home around the foundation and make sure that the basement is not taking on water from the outside due to clogged rain gutters on top of the house or downspouts that are not properly being drained. Just dumping some more dirt around the base of your home may solve the problem if the leaks and flooding only occurs during times of heavy precipitation. All of the soil around your home should be slanted away from the base so that water drains as quickly away as possible.
Most homeowners simply try to cracks in the wall this by caulking the crack shut, but this will not work. Water still seeps through it and in a couple of years, the caulk will peel away. Hydraulic cement also does not work very well, because it does not bond well to the concrete. Cement will be very rigid while the concrete is always moving, shrinking, and expanding over time. The cement that you place inside the crack will become just as loose as caulking would.
The best thing to do is to about cracks in the basement wall is to use a low-pressure crack injection of concrete. It used to require heavy and expensive equipment to do this, but these days you can accomplish this task with a simple conventional caulking gun.
Since most cracks in basement walls are caused by water seepage and are not structurally dangerous, expandable polyurethane is typically the best choice to repair them with. It does not add any structural strength to the concrete, but simply creates a waterproof barrier. No matter whether the crack is dry or wet at the time you are going to fill it, the polyurethane will still bond to it.
Epoxy injection can also be used, but it will not bond to wet surfaces, among other problems. It should be used only when there are cracks that appear in concrete block walls or big cracks in slabs of concrete.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and
mold remediation companies across the united states.
Water Damage and Structural Inspection
Whether you are buying a new home or are considering possibly selling your old one, you need to know that the home is a good value for the price. Sometimes you might want to have someone professionally inspect the home for you to alert you of anything that might need to be repaired or any changes that might need to be made to the home, but this is not always the case if you know what you need to look for. There are several different things you should keep an eye out for when you do your own home inspection either before you buy or before you sell.
The dirt around the foundation of the home should be slanted away from it so that any rainfall will flow away from the home instead of settling around the foundation in a pocket. This water will seep down into your basement, if you have one. Downspouts should have extensions that will further help direct water away from the base of the home.
Go away from the home and stand a fair distance from it and just look at the structure. Taking someone with you is a good idea because a second opinion is usually wanted. Ask yourself and the person you took with you if the home appears to be tilted one way or another. The structure should not appear to be unstable. After you to this, go inside and be certain that all corners are at a right angle where they need to be. Go into the living room and in other rooms of the home and jump in the middle of it. If the floor flexes or shakes at all, you may have a problem.
Check kitchen and bathroom fixtures for leaks and for quality. Also note whether there is a steam vent in these two rooms so that steam is allowed to escape the home and not cause water damage to the walls and ceilings.
The roof on the home should not need to be replaced in at least the next five years unless you are unhappy with just the appearance of it. It should not require many repairs, if it requires any at all. Water damage can occur to the attic beams, the insulation, and the drywall underneath. Note that if fiberglass insulation gets wet, it becomes useless and needs to be taken out and replaced.
The house should have a central heat and air unit and if it does not, locate the furnace and determine what type it is. Determine how many rooms of the house do not have access to the heater, if there are any.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
The dirt around the foundation of the home should be slanted away from it so that any rainfall will flow away from the home instead of settling around the foundation in a pocket. This water will seep down into your basement, if you have one. Downspouts should have extensions that will further help direct water away from the base of the home.
Go away from the home and stand a fair distance from it and just look at the structure. Taking someone with you is a good idea because a second opinion is usually wanted. Ask yourself and the person you took with you if the home appears to be tilted one way or another. The structure should not appear to be unstable. After you to this, go inside and be certain that all corners are at a right angle where they need to be. Go into the living room and in other rooms of the home and jump in the middle of it. If the floor flexes or shakes at all, you may have a problem.
Check kitchen and bathroom fixtures for leaks and for quality. Also note whether there is a steam vent in these two rooms so that steam is allowed to escape the home and not cause water damage to the walls and ceilings.
The roof on the home should not need to be replaced in at least the next five years unless you are unhappy with just the appearance of it. It should not require many repairs, if it requires any at all. Water damage can occur to the attic beams, the insulation, and the drywall underneath. Note that if fiberglass insulation gets wet, it becomes useless and needs to be taken out and replaced.
The house should have a central heat and air unit and if it does not, locate the furnace and determine what type it is. Determine how many rooms of the house do not have access to the heater, if there are any.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Subscribe to:
Posts (Atom)
